Assembly Step 2: Enclosure base assembly
Parts List
- Assembled part from Step 1
- 3 x enclosure sides
- 4 x enclosure standoffs
- 4 x enclosure base screws (hardware Bag B);
- UV-B bulb.
Instructions
- Take one of the enclosure base screws and thread it through the corner holes on the enclosure base. On the opposite side of the enclosure, screw in one of the enclosure standoffs. Repeat for all 4 corners of the enclosure base.
- Insert the UV-B bulb into the ballast and place the remaining enclosure sides into the slots in the enclosure base.
