Step 6: Assembly of the enclosure¶
Final assembly steps ! These steps involve attaching the panels to the base and each other using the right-angle brackets mounted in the previous steps and the remaining 19 enclosure screws. Use the images for guidance.
![_images/hardware_bag_6_annotated.png](_images/hardware_bag_6_annotated.png)
Step 1 - Attach back panel¶
Use 2 screws to attach the back panel to the right-angle brackets in the base.
![_images/assembly_back_panel.png](_images/assembly_back_panel.png)
Step 2 - Attach right-side panel¶
Use 2 screws to attach the right-side to the base
![_images/assembly_right_panel.png](_images/assembly_right_panel.png)
Use 2 screws to attach the right-side to the back panel
![_images/assembly_right_panel_2.png](_images/assembly_right_panel_2.png)
Step 3 - Attach left-side panel¶
Use 2 screws to attach the left-side to the base
![_images/assembly_left_panel.png](_images/assembly_left_panel.png)
Use 2 screws to attach the left-side to the back panel
![_images/assembly_multiple_panels.png](_images/assembly_multiple_panels.png)
Step 4 - Attach the door¶
Use 1 screw to secure the door post to the base and 1 screw to secure the door post to the left-side panel
![_images/assembly_door.png](_images/assembly_door.png)